1/4-28 Grade 5 Hex Head Cap Screws

Grade 5 Hex Cap | The Nutty Company, Inc.

Hex Head Cap Screws Data Sheet (PDF) - The Nutty Company

Bolt Tightening Torque Chart (PDF) - The Nutty Company

1/4-28 Grade 5 Hex Head Cap Screws

1/4-28 Grade 5 hex head cap screws in SAE fine thread, zinc plated, in lengths from 3/4" to 2". They take a 7/16" wrench. Short lengths are fully threaded and longer lengths are partially threaded with about 3/4" of thread.

Specifications

  • Size: 1/4-28 (SAE fine)
  • Lengths: 3/4", 1", 1-1/4", 1-1/2", 2"
  • Wrench size: 7/16"
  • Grade: SAE J429 Grade 5, 120,000 psi min. tensile
  • Finish: zinc plated

The length of a cap screw is measured from the under-head bearing surface to the extreme end of the screw.
(FT)=Full Thread | (PT)=Partial Thread
Thread Length on a 1/4-28 bolt is approx. 3/4"
Wrench Size = 7/16"

Stock Photos - to verify Thread Length, goto:

Common Uses

  • Automotive and truck repair
  • Machinery and equipment
  • Fine thread tapped holes

FAQ

What nut fits a 1/4-28 bolt?
A 1/4-28 fine thread hex nut, Grade 5 or higher. A coarse thread 1/4" nut will not fit.

What do USS coarse and SAE fine thread mean?
USS (UNC) coarse thread has fewer threads per inch and is the general purpose standard; it assembles fast and is less likely to cross thread. SAE (UNF) fine thread has more threads per inch, which gives a little more strength and finer adjustment, and is common on vehicles and machinery. The nut must match the thread.

How is the length of a hex bolt measured?
From under the head to the end of the bolt. The head is not included.

Related: All Grade 5 Fine | Grade 8 Fine Thread | Grade 5 Hex Nuts | SAE Flat Washers

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.