Galvanized Carriage Bolts

Galvanized Carriage Bolts

Galvanized carriage bolts have a smooth, domed head and a square neck. The neck pulls into the wood as the nut is tightened, so the bolt can't turn and there is nothing to grab on the head side. That makes them the standard choice for decks, fences, playgrounds and docks. They are hot dip galvanized for outdoor and treated lumber use. Bolts 6" and shorter are fully threaded; longer bolts have 6" of thread.

Galvanized Carriage Bolt | The Nutty Company,Inc.

Carriage Bolts Data Sheet (PDF) - The Nutty Company

Specifications

  • Finish: hot dip galvanized
  • Diameters: 1/4"-20, 5/16"-18, 3/8"-16, 1/2"-13, 5/8"-11, 3/4"-10
  • Lengths: 1" to 24" depending on diameter
  • Bolts 6" and shorter are fully threaded (FT); longer bolts have 6" of thread

Common Uses

  • Deck railings, posts and stairs
  • Fences, gates and playground equipment
  • Docks and boardwalks

FAQ

Do carriage bolts need a washer?
Not under the head. Use a galvanized flat washer under the nut so it doesn't dig into the wood.

How is a carriage bolt measured?
From under the head to the end of the bolt. The domed head is not included.

Related: Galvanized Hex Bolts | Galvanized Hex Nuts | Galvanized USS Flat Washers

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.