Castle Nuts

Castle Nuts

Castle nuts, also called castellated or slotted nuts, have notches cut across the top. After tightening, a cotter pin goes through one slot and a hole drilled in the bolt or shaft, so the nut cannot back off. They are used wherever losing a nut is not an option, like axles, steering linkages and pivot points.

cn.jpg

Specifications

  • Grade 2, zinc plated: 1/4"-28 and 5/16"-24
  • Grade 5, plain steel: 7/16"-20 through 1-1/4"-12
  • Thread: fine (UNF)
  • Requires a drilled bolt or shaft and a cotter pin

Common Uses

  • Trailer and vehicle axle spindles
  • Tie rod ends, ball joints and steering linkages
  • Farm equipment pivots and clevis joints

FAQ

How do I line up the slot with the cotter pin hole?
Tighten to your torque spec, then keep turning to the next slot that lines up with the hole. Never loosen the nut to line up a slot, because that leaves the joint under-torqued.

Related: Grade 5 Hex Nuts | Left Hand Nuts

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.