Turnbuckle Body

Plain Steel Turnbuckle Bodies

Plain steel turnbuckle bodies provide the adjustable center section for assemblies built with matched, compatible threaded end fittings. A body alone is not a complete turnbuckle and does not establish an assembly working load limit. Match thread size, pitch and handedness before selecting a replacement body.

Replacement Center Bodies

A turnbuckle body works with compatible right- and left-hand threaded fittings so rotation adjusts the assembly length. Confirm the required thread arrangement and manufacturer compatibility. End fittings, pins and other connecting hardware must be selected separately as required by the assembly.

Size & Compatibility

Nutty lists plain steel bodies in 5/8 × 12, 3/4 × 12 and 1 × 12 nominal sizes. Check the individual product details and verify the mating threads, usable adjustment and installation dimensions before ordering. Matching nominal diameter alone is not sufficient to establish compatibility.

Plain Steel Finish

These bodies are listed as plain steel, not hot-dip galvanized. Evaluate the environment and any required corrosion protection before selecting a body. Do not treat a replacement body as equivalent to a galvanized complete assembly without checking the material, finish and component compatibility.

Installation & Inspection

Use for straight, in-line tension only. Do not side-load or shock-load. Verify the manufacturer’s working load limit and suitability for the exact complete assembly. Maintain required thread engagement and secure pins, retainers and any locking provisions as instructed. Inspect before use and remove damaged or worn hardware from service. Do not assume general-purpose hardware is approved for overhead lifting, fall protection or personnel support.

Frequently Asked Questions

Does a body include eye, jaw or hook ends?
This category is for the center body. Check the individual product listing for included components and select compatible end fittings as needed.

Will any end fitting of the same diameter work?
No. Match thread diameter, pitch, handedness, material and manufacturer compatibility. Verify the rating of the resulting complete assembly.

Can a body be assigned the load rating of a complete turnbuckle?
Not by size alone. A complete-assembly working load limit requires verified compatible components and manufacturer information.

Other Turnbuckle End Styles

View all turnbuckles · Galvanized Eye & Eye Turnbuckle · Galvanized Hook & Eye Turnbuckle · Galvanized Hook & Hook Turnbuckle · Galvanized Jaw & Eye Turnbuckle · Galvanized Jaw & Jaw Turnbuckle