Phillips Modified Truss Head Drill Screw - Plated

Phillips Modified Truss Head Drill Screw - Plated

#8 Phillips modified truss head self drilling (Tek) screws in zinc plated steel, in 1/2", 3/4" and 1" lengths. They have a #2 Phillips drive and a #2 point that drills .035" to .112" steel. The low, wide head is the common choice for metal stud framing.

Phillips Modified Truss Head Drill Screw - Plated | The Nutty Company, Inc.

Phillips Modified Truss Head Self Drilling Screws Data Sheet (PDF) - The Nutty Company

Specifications

  • Size: #8 (0.164 in. diameter)
  • Head: Phillips modified truss, #2 Phillips drive
  • Point: #2, drilling capacity .035" to .112"
  • Lengths: 1/2", 3/4", 1"
  • Material: steel, zinc plated

Common Uses

  • Metal stud to track framing
  • Light gauge steel
  • Electrical and HVAC brackets

FAQ

What is a self drilling (Tek) screw?
A self drilling screw has a drill bit point, so it drills, taps and fastens in one step with no pilot hole. The point number tells you how thick a metal it can drill: the higher the number, the thicker the metal.

How do I install self drilling screws?
Use a screw gun or drill at moderate speed, not full speed, with steady pressure. Let the point finish drilling before the threads engage, and stop when the head seats so you don't strip the threads.

Related: Modified Truss Head Sheet Metal Screws | Phillips Pan Head Self Drilling | Self Drilling Screws

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.