Stainless Hex Tap (Full Thread) Bolts

Stainless Hex Tap (Full Thread) Bolts

18-8 stainless steel hex tap bolts, threaded all the way to the head, in USS coarse thread: 1/4-20, 5/16-18, 3/8-16, 1/2-13, from 1-1/2" to 6" long. Use them where you need thread along the whole length. Choose a size below.

Stainless Hex Tap (Full Thread) Bolts | The Nutty Company, Inc.

Hex Tap Bolts Data Sheet (PDF) - The Nutty Company

Specifications

  • Material: 18-8 stainless steel
  • Thread: USS coarse (UNC), full thread
  • Sizes: 1/4-20, 5/16-18, 3/8-16, 1/2-13
  • Lengths: 1-1/2" to 6"

Common Uses

  • Tapped holes in stainless and aluminum
  • Joints that need full length thread
  • Outdoor and marine equipment

FAQ

Tap bolt or hex cap screw?
A tap bolt is threaded all the way to the head. A longer hex cap screw has a smooth shank under the head. Use a tap bolt when the thread must reach the head.

How do I stop stainless threads from galling?
Stainless threads can seize (gall) when tightened fast or under heavy load. Put anti-seize on the threads, tighten slowly at low speed, keep the threads clean and don't overtighten.

How strong are 18-8 stainless bolts?
18-8 stainless bolts to ASTM F593 have a minimum tensile strength of about 100,000 psi in 1/4" to 5/8" and about 85,000 psi in 3/4" to 1-1/2". That is stronger than Grade 2 steel but not as strong as Grade 5 or Grade 8.

Related: Stainless Hex Cap Screws | Stainless Hex Nuts | All Stainless Bolts

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.