-
3/8 x 2-1/4 Galvanized Stud Anchor
SKU: GWEJ38214
$1.581each -
3/8 x 2-3/4 Galvanized Stud Anchor
SKU: GWEJ38234
$1.707each -
3/8 x 3 Galvanized Stud Anchor
SKU: GWEJ383
$1.755each -
3/8 x 3-3/4 Galvanized Stud Anchor
SKU: GWEJ38334
$1.866each -
3/8 x 5 Galvanized Stud Anchor
SKU: GWEJ385
$2.196each -
3/8 x 7 Galvanized Stud Anchor
SKU: GWEJ387
$2.290each
3/8" Stud Anchors - Galvanized Steel
3/8" Stud Anchors - Galvanized Steel
These 3/8" galvanized stud anchors (wedge anchors) fasten into solid concrete. Drill a 3/8" hole, drive the anchor through your fixture, and tighten the nut. The clip expands and locks against the concrete. Lengths: 2-1/4" to 7". The galvanized finish suits outdoor and damp locations.

Specifications
- Diameter: 3/8" (drill a 3/8" carbide bit hole)
- Lengths: 2-1/4" to 7"
- Finish: galvanized
- Recommended setting torque: 20-25 ft-lbs (zinc and galvanized)
Common Uses
- Railings, ledgers and shelving
- Outdoor slabs, walls and footings
- Anchoring to solid concrete
FAQ
What size hole do I drill for a 3/8" wedge anchor?
A 3/8" hole, using a carbide bit. Drill deeper than the embedment and clean out the dust.
How tight should I set a 3/8" stud anchor?
Recommended setting torque is 20-25 ft-lbs for zinc and galvanized anchors, or 3 to 5 turns past hand tight.
Related: All Galvanized Concrete Stud Anchors | Galvanized Concrete Power Screws
Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.