Split Lock Washers

Split Lock Washers | The Nutty Company, Inc.

Split Lock Washers Data Sheet (PDF) - The Nutty Company

Split Lock Washers

Split lock washers, also called spring lock washers or helical lock washers, are a ring of spring steel split at one point and twisted slightly. When the nut or bolt is tightened, the washer flattens and keeps spring tension on the joint, which helps keep it from loosening. These are the regular series, zinc plated, in sizes #4 through 1-1/2". A 468 piece flat washer and lock washer assortment is also available.

Specifications

  • Type: regular series split (helical spring) lock washer
  • Sizes: #4, #6, #8, #10 and 1/4" through 1-1/2"
  • Finish: zinc plated
  • 468 pc. SAE flat washer & lock washer assortment available

Common Uses

  • Machine bolts and cap screws
  • Electrical and equipment assembly
  • General maintenance and repair

FAQ

Where does a split lock washer go?
Directly under the nut or bolt head. If you also use a flat washer, the flat washer goes against the part and the lock washer goes on top of it.

Can split lock washers be reused?
Only if they still have their spring and the ends are still offset. Once a lock washer stays flat, replace it.

Related: Grade 8 Split Lock Washers | Hi-Collar Split Lock Washers | SAE Flat Washers

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.