M2 x 0.4 Phillips Pan Head Machine Screw

M2 x 0.4 Phillips Pan Head Machine Screw | The Nutty Company, Inc.

M2 x 0.4 Phillips Pan Head Machine Screws

M2 x 0.4 Phillips pan head machine screws, zinc plated, made to DIN 7985. They take a PH1 Phillips bit. We stock lengths 4mm to 20mm.

Specifications

  • Thread: M2 x 0.4, standard pitch
  • Standard: DIN 7985
  • Lengths: 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
  • Finish: zinc plated
  • Drive: Phillips PH1
  • Tap drill: 1.6mm; clearance hole: 2.4mm

Common Uses

  • Electronics and appliances
  • Cars, bikes and toys
  • Brackets, hinges and panels

FAQ

What screwdriver fits an M2 pan head screw?
A PH1 Phillips screwdriver or bit.

How are metric screws measured?
Diameter x pitch x length, in millimeters. Length is measured from under the head to the end of the screw, except flat (countersunk) heads, which are measured overall.

Related: M2.5 x 0.45 Pan Head | Metric Hex Nuts | All Metric Pan Head Machine Screws

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.

!