Stainless Steel Metric Threaded Rod

Stainless Steel Metric Threaded Rod

A2 stainless steel metric threaded rod in 1 meter (39.37") lengths, standard pitch, in M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75, M14 x 2.0, M16 x 2.0, M18 x 2.5, M20 x 2.5, M24 x 3.0, M30 x 3.5, M36 x 4.0. Cut it to length for studs, hangers, anchors and long bolts.

Specifications

• Material: A2 stainless steel
• Tensile strength: 102,000 psi
• Length: 1 meter (39.37")
• Sizes: M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75, M14 x 2.0, M16 x 2.0, M18 x 2.5, M20 x 2.5, M24 x 3.0, M30 x 3.5, M36 x 4.0
• Pitch: standard (coarse)
• Type 316 (A4) stainless available, please contact us

Common Uses

• Hanging pipe, duct and cable tray
• Anchors and studs
• Marine and food equipment
• Long bolts and tie rods

FAQ

Can I cut stainless threaded rod?
Yes. Thread a nut on first, cut with a band saw, hacksaw or cut-off wheel, file the end, then back the nut off to clean up the threads. Use anti-seize on stainless nuts to prevent galling.

Does threaded rod qualify for flat fee or free shipping?
No. Threaded rod does not qualify for $10.95 flat fee shipping or free shipping. We contact you with a discounted shipping charge for your approval before your order ships.

Are metric and inch fasteners interchangeable?
No. Close sizes such as M6 and 1/4" or M10 and 3/8" have different diameters and thread pitches, and they will cross thread. Use metric nuts and washers with metric bolts and screws.

Related: Stainless Metric Hex Rod Coupling Nuts | Stainless Metric Hex Nuts | Stainless Threaded Rod (inch) | Metric Threaded Rod

Note: Threaded rod does not qualify for $10.95 flat fee shipping or free shipping. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.