1/4 Hex Washer Head Concrete Screws

1/4" hex washer head concrete screws in Blocker coated steel, 5/16 in. hex with slot drive, in 1-1/4" to 6" lengths. Each box of 100 includes the right size masonry drill bit. Stock numbers are in the table below.

Specifications

Diameter: 1/4"
Head: hex washer head, 5/16 in. hex with slot drive
Lengths: 1-1/4", 1-3/4", 2-1/4", 2-3/4", 3-1/4", 3-3/4", 4", 5", 6"
Material: steel with Blocker corrosion resistant coating
Pack: box of 100 with masonry drill bit

Dimensions

Stock #	Size	Drive System	Quantity Per Box
TCH14114	1/4 x 1-1/4"	5/16 hex with slot	100
TCH14134	1/4 x 1-3/4"	5/16 hex with slot	100
TCH14214	1/4 x 2-1/4"	5/16 hex with slot	100
TCH14234	1/4 x 2-3/4"	5/16 hex with slot	100
TCH14314	1/4 x 3-1/4"	5/16 hex with slot	100
TCH14334	1/4 x 3-3/4"	5/16 hex with slot	100
TCH144	1/4 x 4"	5/16 hex with slot	100
TCH145	1/4 x 5"	5/16 hex with slot	100
TCH146	1/4 x 6"	5/16 hex with slot	100

Common Uses

Concrete, brick and block
Electrical and plumbing fixtures
Furring strips and frames

FAQ

How do I install concrete screws?
Drill a hole with the masonry bit included in the box, at least 1/4 in. deeper than the screw will go. Blow out the dust, then drive the screw with a drill driver until the head seats. Don't over-tighten.

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.