Galvanized Threaded Rod - 3 foot

Galvanized Threaded Rod | The Nutty Company, Inc

Threaded Rod Data Sheet (PDF) - The Nutty Company

Galvanized Threaded Rod - 3 foot

3 foot hot dip galvanized threaded rod in coarse (USS) thread, from 3/8"-16 to 1"-8. The thick zinc coating holds up outdoors and in treated lumber. Custom length rods are available. Please contact us.

Specifications

  • Length: 3 ft. (36 in.)
  • Finish: hot dip galvanized
  • Thread: coarse (USS), right hand
  • Sizes: 3/8"-16, 1/2"-13, 5/8"-11, 3/4"-10, 1"-8

Common Uses

  • Docks, decks and timber framing
  • Foundation tie-downs
  • Outdoor supports and hangers

FAQ

What nut fits galvanized threaded rod?
Use galvanized nuts. Hot dip galvanizing adds thickness to the threads, so galvanized nuts are tapped oversize to fit. A standard nut will bind.

Can I cut threaded rod to length?
Yes. Thread a nut on first, cut with a hacksaw, band saw or cut-off wheel, then file the end and back the nut off. Backing the nut off cleans up the first threads at the cut.

Related: Galvanized Threaded Rod 6' | Galvanized Hex Nuts | Galvanized Rod Coupling Nuts | Contact us for custom lengths

Note: Threaded rod does not qualify for $10.95 flat fee shipping or free shipping. 10' and 12' threaded rods ship by motor freight, F.O.B. Milford, CT 06460.

Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.