1-1/4" Stud Anchors - Galvanized Steel

1-1/4" Stud Anchors - Galvanized Steel

These 1-1/4" galvanized stud anchors (wedge anchors) fasten into solid concrete. Drill a 1-1/4" hole, drive the anchor through your fixture, and tighten the nut. The clip expands and locks against the concrete. Lengths: 9" and 12". The galvanized finish suits outdoor and damp locations.

Specifications

• Diameter: 1-1/4" (drill a 1-1/4" carbide bit hole)
• Lengths: 9" and 12"
• Finish: galvanized
• Recommended setting torque: 400-410 ft-lbs (zinc and galvanized)

Common Uses

• Very heavy structural and industrial anchoring
• Outdoor slabs, walls and footings
• Anchoring to solid concrete

FAQ

What size hole do I drill for a 1-1/4" wedge anchor?
A 1-1/4" hole, using a carbide bit. Drill deeper than the embedment and clean out the dust.

How tight should I set a 1-1/4" stud anchor?
Recommended setting torque is 400-410 ft-lbs for zinc and galvanized anchors, or 3 to 5 turns past hand tight.

Related: All Galvanized Concrete Stud Anchors | Galvanized Concrete Power Screws

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.