1" Stud Anchors - Galvanized Steel

1" Stud Anchors - Galvanized Steel

These 1" galvanized stud anchors (wedge anchors) fasten into solid concrete. Drill a 1" hole, drive the anchor through your fixture, and tighten the nut. The clip expands and locks against the concrete. Lengths: 6", 9" and 12". The galvanized finish suits outdoor and damp locations.

Specifications

• Diameter: 1" (drill a 1" carbide bit hole)
• Lengths: 6", 9" and 12"
• Finish: galvanized
• Recommended setting torque: 290-300 ft-lbs (zinc and galvanized)

Common Uses

• Large equipment and structural steel
• Outdoor slabs, walls and footings
• Anchoring to solid concrete

FAQ

What size hole do I drill for a 1" wedge anchor?
A 1" hole, using a carbide bit. Drill deeper than the embedment and clean out the dust.

How tight should I set a 1" stud anchor?
Recommended setting torque is 290-300 ft-lbs for zinc and galvanized anchors, or 3 to 5 turns past hand tight.

Related: All Galvanized Concrete Stud Anchors | Galvanized Concrete Power Screws

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.