7/8" Stud Anchors - Galvanized Steel

7/8" Stud Anchors - Galvanized Steel

These 7/8" galvanized stud anchors (wedge anchors) fasten into solid concrete. Drill a 7/8" hole, drive the anchor through your fixture, and tighten the nut. The clip expands and locks against the concrete. Lengths: 6" to 10". The galvanized finish suits outdoor and damp locations.

7/8" Stud Anchors - Galvanized Steel | The Nutty Company, Inc.

Specifications

  • Diameter: 7/8" (drill a 7/8" carbide bit hole)
  • Lengths: 6" to 10"
  • Finish: galvanized
  • Recommended setting torque: 240-250 ft-lbs (zinc and galvanized)

Common Uses

  • Heavy columns and equipment
  • Outdoor slabs, walls and footings
  • Anchoring to solid concrete

FAQ

What size hole do I drill for a 7/8" wedge anchor?
A 7/8" hole, using a carbide bit. Drill deeper than the embedment and clean out the dust.

How tight should I set a 7/8" stud anchor?
Recommended setting torque is 240-250 ft-lbs for zinc and galvanized anchors, or 3 to 5 turns past hand tight.

Related: All Galvanized Concrete Stud Anchors | Galvanized Concrete Power Screws

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.

!