5/16" Galvanized Shouldered Eye Bolt

5/16" Galvanized Shouldered Eye Bolt

These 5/16"-18 galvanized shouldered eye bolts are drop forged steel, hot dip galvanized, and come with a galvanized hex nut. The forged shoulder under the eye lets them take angled loads at a reduced rating when the shoulder is seated flat. Working load limit: 800 lb in-line, 240 lb at 45° and 200 lb at 90°. Shank lengths in stock: 2-1/4" and 4-1/4". Full dimensions are on the Data Sheet (PDF) below.

Galvanized shouldered eye bolt with hex nut  Galvanized shouldered eye bolt dimension diagram

Galvanized Shouldered Eye Bolts Data Sheet (PDF) - The Nutty Company

Galvanized Hex Nut included

Common Uses

  • Lifting and rigging points, including angled lifts
  • Outdoor and marine tie-downs
  • Through-bolted anchor points in wood or steel

FAQ

What is the working load limit of a 5/16" shouldered eye bolt?
800 lb in-line (0°), 240 lb at 45° and 200 lb at 90°, with a 5:1 design factor. The angled ratings apply only when the shoulder is seated flat and tight.

How do I install a 5/16" shouldered eye bolt?
Seat the shoulder flat and tight against the surface, then tighten the nut. If the shoulder is not in full contact, treat it as a plain eye bolt (in-line pull only).

What size hole for a 5/16" eye bolt?
Drill a 5/16" hole, or slightly larger, so the shank passes through without forcing. Full dimensions for every part number are on the Data Sheet (PDF).

Related: All Galvanized Shouldered Eye Bolts | Galvanized Forged Eye Bolts | Galvanized USS Flat Washers

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.

!