3/4 Galvanized Timber Bolts

These 3/4"-10 galvanized timber bolts have a large dome head with rings underneath that seat into the wood and help keep water out of the bolt hole. The head replaces a flat washer and leaves a low, snag-free profile. They are hot dip galvanized in lengths from 12" to 24".

3/4 Galvanized Timber Bolts | The Nutty Company, Inc.

Specifications

Size: 3/4"-10
Head: large low-profile dome with rings under the head
Finish: hot dip galvanized
Lengths: 12" to 24"
Thread: All lengths have 6" of thread

Common Uses

Heavy timber bridges and marine structures
Exposed timber where a flush, safe head matters
Outdoor structures in wet locations

FAQ

What nut and washer go with a 3/4" timber bolt?
A 3/4"-10 galvanized hex nut with a galvanized dock, ogee or USS washer under it.

What size hole for a 3/4" timber bolt?
Drill a 3/4" hole, or 1/16" larger in wet or hard timber, so the bolt can be driven through without splitting the wood.

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.