M5 x 0.8 Phillips Flat Head Machine Screws

M5 x 0.8 Phillips Flat Head Machine Screws | The Nutty Company, Inc.

M5 x 0.8 Phillips Flat Head Machine Screws

M5 x 0.8 Phillips flat head (countersunk) machine screws, zinc plated, made to DIN 965, full thread. They take a PH2 Phillips bit. We stock lengths 8mm to 50mm, measured overall.

Specifications

  • Thread: M5 x 0.8, standard pitch
  • Standard: DIN 965, 90 degree head
  • Lengths: 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm
  • Finish: zinc plated
  • Drive: Phillips PH2
  • Tap drill: 4.2mm; clearance hole: 5.5mm

Common Uses

  • Hinges, latches and hardware
  • Electronics and enclosures
  • Flush mounted panels

FAQ

What screwdriver fits an M5 flat head screw?
A PH2 Phillips screwdriver or bit.

How are flat head screws measured?
Overall, from the top of the head to the end, because the head sits in the countersink.

Related: M4 x 0.7 Flat Head | M6 x 1.0 Flat Head | All Metric Flat Head Machine Screws

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.