#10 Phillips Flat Head Self Drilling Screws Plated

#10 Phillips flat head self drilling (Tek) screws in zinc plated steel, with a #2 Phillips drive and a countersunk head, with a #3 drill point that drills .035" to .175" steel. We stock 1" to 2" lengths, measured overall.

#10 Phillips Flat Head Self Drilling Screws Plated | The Nutty Company, Inc.

Specifications

Size: #10 (0.190 in. diameter)
Head: Phillips flat, #2 Phillips drive
Point: #3, drilling capacity .035" to .175"
Lengths: 1", 1-1/4", 1-1/2", 2"
Material: steel, zinc plated

Common Uses

Wood or plywood to steel
Flush mounted hardware
Metal framing

FAQ

What is a self drilling (Tek) screw?
A self drilling screw has a drill bit point, so it drills, taps and fastens in one step with no pilot hole. The point number tells you how thick a metal it can drill: the higher the number, the thicker the metal.

How are screw lengths measured?
Flat head (countersunk) screws are measured overall, from the top of the head to the tip. Pan, truss, round and hex washer head screws are measured from under the head to the tip.

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.