1/4" Galvanized Hex Lag Bolts

1/4" Galvanized Hex Lag Bolts

These 1/4" galvanized hex lag bolts (lag screws) are hot dip galvanized for treated lumber and outdoor use. The gimlet point starts easily in a pilot hole, and the hex head drives with a 7/16" wrench or socket. We stock lengths from 1" to 6". Use a 1/4" galvanized flat washer under the head.

1/4" Galvanized Hex Lag Bolts | The Nutty Company, Inc.

Hex Head Lag Screws Data Sheet (PDF) - The Nutty Company

Specifications

  • Diameter: 1/4"
  • Type: hex head lag screw, gimlet point
  • Finish: hot dip galvanized
  • Lengths: 1" to 6"
  • Wrench / socket size: 7/16"

Common Uses

  • Fence boards and gate hardware
  • Light brackets and hangers
  • Small outdoor fixtures

FAQ

What socket fits a 1/4" lag bolt?
A 7/16" socket or wrench.

How deep should a 1/4" lag bolt go into the wood?
Get as much thread into the main member as you can. A common rule is thread penetration of at least 8 times the diameter for full strength. Check your local code or engineer for structural connections.

Related: All Galvanized Hex Lag Bolts | Galvanized USS Flat Washers

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.

!