#10 Phillips Pan Head Self Drilling Screws Plated

#10 Phillips Pan Head Self Drilling Screws Plated

#10 Phillips pan head self drilling (Tek) screws in zinc plated steel, with a #2 Phillips drive and a #3 drill point that drills .035" to .175" steel. We stock 1/2" to 2" lengths.

#10 Phillips Pan Head Self Drilling Screws Plated | The Nutty Company, Inc.

Phillips Pan Head Self Drilling Screws Data Sheet (PDF) - The Nutty Company

Specifications

  • Size: #10 (0.190 in. diameter)
  • Head: Phillips pan, #2 Phillips drive
  • Point: #3, drilling capacity .035" to .175"
  • Lengths: 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2", 2"
  • Material: steel, zinc plated

Common Uses

  • Metal studs and track
  • Duct work and electrical boxes
  • Sheet metal assemblies

FAQ

What is a self drilling (Tek) screw?
A self drilling screw has a drill bit point, so it drills, taps and fastens in one step with no pilot hole. The point number tells you how thick a metal it can drill: the higher the number, the thicker the metal.

How do I install self drilling screws?
Use a screw gun or drill at moderate speed, not full speed, with steady pressure. Let the point finish drilling before the threads engage, and stop when the head seats so you don't strip the threads.

Related: Phillips Pan Head Self Drilling Screws | #10 Hex Washer Head Self Drilling | Drive Bits

Free shipping on orders over $100, and orders placed before noon EST ship the same day. Purchase orders are accepted from government agencies, schools, hospitals, municipalities and companies with established credit with The Nutty Company, Inc.

!